From:
ragnarok@DOCKSUD.remove-r1u-this
To: DOVE-Net.Synchronet_Discussion
Hi all!
I already have binkit configured as node for several nets. (fido, fsx, micronet, etc) this just work fine.
My fido node are 4:902/26 and also, for testing purpose, i have some
points as downlinks for my fidonet node (ex: 4:902/26.3, 4:902/26.5, etc)
This also works. I can add/remove areas from the "sbbsecho areafix" from
these points and get these packets.
Now, i thinking on receive the 4:900 segment to get downlink
nodes/clients like 4:900/10, 4:900/11, etc. (I think that this setup
called "fidonet hub" mode)
My questing are:
Should I add the 4:900 on scfg->networks->fidonet->system addresses
or must be a node aka like 4:900/0 ?
This is my actual linked nodes:
[·][?]─────────────────────────────────────────┐
│ Linked Nodes │ ├───────────────────────────────────────────────┤
│ │1:ALL (.001) │
│ │2:ALL (.002) │
│ │3:ALL (.003) │
│ │4:ALL (.004) │
│ │4:902/26.3 (0386001a) Fernando Toledo │
│ │4:902/26.10 (0386001a) Fernando Toledo │
│ │4:902/26.5 (0386001a) Gateway │
│ │4:90/1 (005a0001) Momia BBS │
│ │21:2/100 (00020064) FSXNET Hub │
│ │21:ALL (.015) FSXNET NET │
│ │618:ALL (.26A) Micronet NET │
│ |618:500/1 (01f40001) Micronet HUB │ └───────────────────────────────────────────────┘
I already have a node setting to 4:90/1 to get packets for my actual
node (4:902/26)
Should i add another (duplicated) 4:90/1 settings to get the 4:900/xxxx
?? (will generate a new poll to my boos?)
When add a new node downlink (ej 4:900/100) the RouteTo settings have to
let it empty??
I paste my relevant settings of sbbsecho.ini
[node:1:ALL@fidonet]
Route = 4:90/1
LocalAddress = 4:902/26
[node:2:ALL@fidonet]
Route = 4:90/1
LocalAddress = 4:902/26
[node:3:ALL@fidonet]
Route = 4:90/1
LocalAddress = 4:902/26
[node:4:ALL@fidonet]
Route = 4:90/1
LocalAddress = 4:902/26
[node:4:902/26.3@fidonet]
Status = Hold
LocalAddress = 4:902/26
[node:4:902/26.10@fidonet]
Status = Hold
[node:4:902/26.5@fidonet]
Status = Hold
LocalAddress = 4:902/26
[node:4:90/1@fidonet]
Status = Normal
LocalAddress = 4:902/26
BinkpHost = momiabbs.no-ip.info
BinkpPort = 24554
BinkpPoll = true
[node:21:2/100@fsxnet]
Status = Normal
BinkpHost = error404bbs.ddns.net
BinkpPort = 24555
BinkpPoll = true
[node:21:ALL@fsxnet]
Status = Normal
Route = 21:2/100
[node:618:ALL@micronet]
Status = Normal
Route = 618:500/1
LocalAddress = 618:500/45
[node:618:500/1@micronet]
Status = Normal
LocalAddress = 618:500/45
BinkpHost = bbs.darkrealms.ca
BinkpPort = 24554
BinkpPoll = true
[domain:fidonet]
Zones = 1,2,3,4
DNSSuffix =
NodeList = /sbbs/fido/NODELIST.FIDO
[domain:fsxnet]
Zones = 21
DNSSuffix =
NodeList = /sbbs/fido/NODELIST.FSXNET
[domain:micronet]
Zones = 618
DNSSuffix =
OutboundRoot = /sbbs/fido/outbound
NodeList = /sbbs/fido/NODELIST.MICRONET
Sorry my english, and noob questions.. i want to learn and investigate
if are possible to get a complete routing system using synchronet binkit+sbbsecho or need external aplication to do this work.
Thanks!
---
￭ Synchronet ￭ Dock Sud BBS TLD 24 HS - bbs.docksud.com.ar
--- Synchronet 3.17c-Win32 NewsLink 1.111
* Vertrauen - Riverside County, California -
telnet://vert.synchro.net
--- SoupGate-Win32 v1.05
* Origin: www.darkrealms.ca (1:229/2)