Seems there may be issues with sending files such as nodelists etc.

Have a look at the MIS2 logging and you will see connections with message packets being sent but other files timing out. This seems to be happening across a number of nodes.

I will revert to MIS for IPv4 BinkP connects after posting this.

[snip]

+ 12:36:50 BINKP Connect on slot 1/16
+ 12:36:50 BINKP 1-Addr: 209.181.225.151
+ 12:36:50 BINKP 1-Host: 209-181-225-151.mpls.qwest.net
+ 12:36:51 BINKP 1-SysOp: Jeff Smith
+ 12:36:51 BINKP 1-Authenticating 21:1/128@fsxnet by Cleartext
+ 12:36:51 BINKP 1-Queued 3 files for 21:1/128@fsxnet
+ 12:36:51 BINKP 1-Sending: fsxinfo.zip (52,210 bytes)
+ 12:36:59 BINKP Connect on slot 2/16
+ 12:36:59 BINKP 2-Addr: 199.166.5.19
+ 12:36:59 BINKP 2-Host: zork.platinum.net
+ 12:36:59 BINKP 2-System: The Parity Error
+ 12:36:59 BINKP 2-SysOp: Ian McLaughlin
+ 12:36:59 BINKP 2-Authenticating 21:1/133@fsxnet by CRAM-MD5
+ 12:36:59 BINKP 2-Queued 3 files for 21:1/133@fsxnet
+ 12:36:59 BINKP 2-Sending: fsxinfo.zip (52,210 bytes)
+ 12:37:07 BINKP 1-Session timeout
+ 12:37:07 BINKP 1-Session complete (0 sent, 0 rcvd, 0 skip)
+ 12:37:13 BINKP Connect on slot 1/16
+ 12:37:13 BINKP 1-Addr: 97.40.192.51
+ 12:37:13 BINKP 1-Host: 51.sub-97-40-192.myvzw.com
+ 12:37:13 BINKP 1-System: Stepping Stone BBS
+ 12:37:13 BINKP 1-SysOp: Jon Justvig
+ 12:37:14 BINKP 1-Authenticating 21:1/154@fsxnet by CRAM-MD5
+ 12:37:14 BINKP 1-Queued 4 files for 21:1/154@fsxnet
+ 12:37:15 BINKP 1-Sending: 0000ffca.th2 (43,317 bytes)
+ 12:37:16 BINKP 2-Session timeout
+ 12:37:16 BINKP 2-Session complete (0 sent, 0 rcvd, 0 skip)
+ 12:37:33 BINKP 1-Session timeout
+ 12:37:33 BINKP 1-Session complete (0 sent, 0 rcvd, 0 skip)
+ 12:38:49 BINKP Connect on slot 1/16
+ 12:38:49 BINKP 1-Addr: 209.181.225.151
+ 12:38:49 BINKP 1-Host: 209-181-225-151.mpls.qwest.net
+ 12:38:50 BINKP 1-SysOp: Jeff Smith
+ 12:38:50 BINKP 1-Authenticating 21:1/128@fsxnet by Cleartext
+ 12:38:50 BINKP 1-Queued 3 files for 21:1/128@fsxnet
+ 12:38:50 BINKP 1-Sending: fsxinfo.zip (52,210 bytes)
+ 12:39:07 BINKP 1-Session timeout
+ 12:39:07 BINKP 1-Session complete (0 sent, 0 rcvd, 0 skip)
+ 12:40:22 BINKP Connect on slot 1/16
+ 12:40:22 BINKP 1-Addr: 71.72.9.255
+ 12:40:22 BINKP 1-Host: cpe-71-72-9-255.neo.res.rr.com
+ 12:40:23 BINKP 1-System: The Zone BBS
+ 12:40:23 BINKP 1-SysOp: Zarnock
+ 12:40:23 BINKP 1-Authenticating 21:1/174@fsxnet by CRAM-MD5
+ 12:40:23 BINKP 1-Queued 0 files for 21:1/174@fsxnet
+ 12:40:23 BINKP 1-Session complete (0 sent, 0 rcvd, 0 skip)
+ 12:40:27 BINKP Connect on slot 1/16
+ 12:40:27 BINKP 1-Addr: 208.180.129.64
+ 12:40:27 BINKP 1-Host: 208-180-129-64.com.sta.suddenlink.net
+ 12:40:27 BINKP 1-System: Tek42
+ 12:40:27 BINKP 1-SysOp: Ozric
+ 12:40:27 BINKP 1-Authenticating 21:1/198@fsxnet by CRAM-MD5
+ 12:40:27 BINKP 1-Queued 4 files for 21:1/198@fsxnet
+ 12:40:27 BINKP 1-Sending: 0000ff9e.su8 (1,073 bytes)
+ 12:40:28 BINKP 1-Sending: fsxinfo.zip (52,210 bytes)
+ 12:40:45 BINKP 1-Session timeout
+ 12:40:45 BINKP 1-Session complete (1 sent, 0 rcvd, 0 skip)

[snip]

Best, Paul

--- Mystic BBS v1.12 A35 (Windows/32)
* Origin: Agency BBS | telnet://agency.bbs.geek.nz (21:1/101)

Seems there may be issues with sending files such as nodelists etc.
Have a look at the MIS2 logging and you will see connections with message packets being sent but other files timing out. This seems to be happening across a number of nodes.
I will revert to MIS for IPv4 BinkP connects after posting this.
[snip]
+ 12:36:50 BINKP Connect on slot 1/16
+ 12:36:50 BINKP 1-Addr: 209.181.225.151
+ 12:36:50 BINKP 1-Host: 209-181-225-151.mpls.qwest.net
+ 12:36:51 BINKP 1-SysOp: Jeff Smith
+ 12:36:51 BINKP 1-Authenticating 21:1/128@fsxnet by Cleartext
+ 12:36:51 BINKP 1-Queued 3 files for 21:1/128@fsxnet
+ 12:36:51 BINKP 1-Sending: fsxinfo.zip (52,210 bytes)

Considering the 18 hour time difference involved the log here shows:

171021 18:46 --------------------------
171021 18:47 Calling fsxNet HUB, ipv4.agency.bbs.geek.nz:24556
171021 18:47 CONNECT 57600/RAW
171021 18:47 BinkP mail session
171021 18:47 fsxHUB [fsxNet WHQ], 21:1/100
171021 18:47 AKA: 21:1/3
171021 18:47 AKA: 21:1/2
171021 18:47 AKA: 21:1/0
171021 18:47 AKA: 21:0/0
171021 18:47 SysOp: Paul Hayton
171021 18:47 Using: Mystic/1.12A35 binkp/1.0
171021 18:47 Received: fsxinfo.zip (BinkP, 51kB, 52210cps)
171021 18:47 Received: FSXNET.tic (BinkP, 2kB, 1967cps)
171021 18:47 Received: FSXNET.Z00 (BinkP, 7kB, 7021cps)
171021 18:47 Mail session completed
171021 18:47 --------------------------

Does your end show the connection completed? Does your log show the date of the
connection?


Jeff

--- BBBS/Li6 v4.10 Toy-3
* Origin: FsxNet: The Ouija Board - bbs.ouijabrd.net (21:1/128)

Quoting Avon to All <=-

I will revert to MIS for IPv4 BinkP connects after posting this.

What sucks is I have IPv6 native here, I just can't get it to work I
every 6-8 months fight with it again but always fail. It's just too
complex for the average person I belive. (Though I know many people
argue with me about that!) ;)

Shawn

... "Facts are stubborn things" -- T. Smollett
--- Blue Wave/386
* Origin: Smells like raspberry pi in here. (21:1/130.4)

Hello Avon,

Seems there may be issues with sending files such as nodelists etc.
Have a look at the MIS2 logging and you will see connections with message packets being sent but other files timing out. This seems to be happening across a number of nodes.
I will revert to MIS for IPv4 BinkP connects after posting this.
[snip]
+ 12:36:50 BINKP Connect on slot 1/16
+ 12:36:50 BINKP 1-Addr: 209.181.225.151
+ 12:36:50 BINKP 1-Host: 209-181-225-151.mpls.qwest.net
+ 12:36:51 BINKP 1-SysOp: Jeff Smith
+ 12:36:51 BINKP 1-Authenticating 21:1/128@fsxnet by Cleartext
+ 12:36:51 BINKP 1-Queued 3 files for 21:1/128@fsxnet
+ 12:36:51 BINKP 1-Sending: fsxinfo.zip (52,210 bytes)

It seems I am having an issue also. It seems to be when the fsxinfo.zip file is
being transfered from BBBS to Mystic A36. The actual transmission path is from
you 21:1/100 to me 21:1/128 (BBBS) to me 21:1/128.2 (Mystic v1.12 A36). Currently I am only using MIS to handle Telnet, BinkP, and Events in Mystic A36. Below is a log of the Mystic side of the transfer.

Oct 23 11:06:24 0 Opening socket on 209.181.225.151:24557 Oct 23 11:07:27 0 Connect: 209.181.225.151 (bbs.ouijabrd.net) Oct 23 11:07:27 1 ZYZ Jeff Smith Oct 23 11:07:27 1 LOC Anoka, MN - bbs.ouijabrd.net Oct 23 11:07:27 1 VER BBBS/Li6 v4.10 Toy-3 binkp/1.0 Oct 23 11:07:27 1 NDL CM,IBM,IFT,INA Oct 23 11:07:27 1 ADR 1:282/1031.0@fidonet 21:1/128.0@fsxnet Oct 23 11:07:27 1 Authenticating 21:1/128@fsxnet by Cleartext Oct 23 11:07:27 1 Password accepted
Oct 23 11:07:27 1 Queuing for 21:1/128@fsxnet by Cleartext Oct 23 11:07:27 1 Password accepted Oct 23 11:07:27 1 Queued 0 files for 21:1/128 Oct 23 11:07:27
1 Receiving fsxinfo.zip (53,062 bytes) Oct 23 11:08:28 1 Session timeout <--------------------------Session Timeout Oct 23 11:08:28 1 Session complete (0 sent, 0 rcvd, 0 skip)<-No Files Received


Now when mail files are involved in PKT form or other files such as TIC's the files seem to get transfered without any problems at least from BBBS's perspective. Below is a log of the BBBS side of the transfer:

71023 11:01 -------------------------- 171023 11:07 Calling The OuijaBoard III,
209.181.225.151:24557
171023 11:07 CONNECT 57600/RAW
171023 11:07 BinkP mail session
171023 11:07 The OuijaBoard Too, 1:282/1033
171023 11:07 AKA: 21:1/128.2
171023 11:07 SysOp: Jeff Smith
171023 11:07 Using: Mystic/1.12A36 binkp/1.0
171023 11:07 Sent: /home/bbbs/files/fsx_info/fsxinfo.zip (BinkP, 52kB, 53062cps)
171023 11:07 Sent: /home/bbbs/fido/outbound/89e40d7b.pkt (BinkP, 32kB, 32664cps)
171023 11:07 Sent: /home/bbbs/fido/outbound/bb9dc193.tic (BinkP, 3kB, 2652cps) 171023 11:07 Sent: /home/bbbs/fido/outbound/bb3974af.tic (BinkP, 2kB, 1906cps) 171023 11:07 Sent: /home/bbbs/fido/outbound/bb9dc195.tic (BinkP, 2kB, 1972cps) 171023 11:07 Sent: /home/bbbs/fido/outbound/bb3974ad.tic (BinkP, 1kB, 1259cps) 171023 11:07 Sent: /home/bbbs/fido/outbound/bb1dc8c0.tic (BinkP, 3kB, 2618cps) 171023 11:07 Sent: /home/bbbs/fido/outbound/bb1a7cfb.tic (BinkP, 2kB, 1937cps) 171023 11:07 Sent: /home/bbbs/fido/outbound/89e5404e.pkt (BinkP, 4kB, 3795cps) 171023 11:07 Sent: /home/bbbs/files/fsx_node/FSXNET.Z93 (BinkP, 7kB, 7509cps) 171023 11:07 Sent: /home/bbbs/files/fsx_info/fsxinfo.zip (BinkP, 52kB, 53062cps)
171023 11:07 Sent: /home/bbbs/files/fsx_node/FSXNET.Z86 (BinkP, 7kB, 7404cps) 171023 11:07 Sent: /home/bbbs/fido/outbound/bb32a3be.tic (BinkP, 3kB, 2652cps) 171023 11:07 Sent: /home/bbbs/files/fsx_node/FSXNET.Z79 (BinkP, 7kB, 7308cps) 171023 11:07 Sent: /home/bbbs/files/fsx_info/fsxinfo.zip (BinkP, 52kB, 53062cps)
171023 11:07 Sent: /home/bbbs/fido/outbound/bb2f57f2.tic (BinkP, 2kB, 1972cps) 171023 11:08 Mail session completed

As I see it both sides of the transfer can't be telling the truth of the situation. I will try to visually monitor the next transfer from both sides.


Jeff

--- BBBS/Li6 v4.10 Toy-3
* Origin: FsxNet: The Ouija Board - bbs.ouijabrd.net (21:1/128)

On 10/24/17, Jeff Smith pondered and said...

It seems I am having an issue also. It seems to be when the fsxinfo.zip file is being transfered from BBBS to Mystic A36. The actual
transmission path is from you 21:1/100 to me 21:1/128 (BBBS) to me 21:1/128.2 (Mystic v1.12 A36). Currently I am only using MIS to handle Telnet, BinkP, and Events in Mystic A36. Below is a log of the Mystic
side of the transfer.

So this issue is appearing for you in MIS not MIS2 as it was for me?

--- Mystic BBS v1.12 A35 (Windows/32)
* Origin: Agency BBS | telnet://agency.bbs.geek.nz (21:1/101)

Hello Avon,

On 10/24/17, Jeff Smith pondered and said...

It seems I am having an issue also. It seems to be when the fsxinfo.zip
file is being transfered from BBBS to Mystic A36. The actual
transmission path is from you 21:1/100 to me 21:1/128 (BBBS) to me
21:1/128.2 (Mystic v1.12 A36). Currently I am only using MIS to handle
Telnet, BinkP, and Events in Mystic A36. Below is a log of the Mystic
side of the transfer.

So this issue is appearing for you in MIS not MIS2 as it was for me?

Yes. I only have MIS loaded and it is currently only setup to handle Telnet, BinkP, and Events.

I can try to use MIS2 to handle Telnet and BinkP and only use MIS for Events if
that would help testing the situation. I currently have not loaded MIS2 at all
since A36 was installed.

I also have Mystic A35 Lin64 installed on another machine that I can adjust the setup on if needed to assist.


Jeff

--- BBBS/Li6 v4.10 Toy-3
* Origin: FsxNet: The Ouija Board - bbs.ouijabrd.net (21:1/128)

Have a look at the MIS2 logging and you will see connections with message packets being sent but other files timing out. This seems to be happening across a number of nodes.

BINKP in A36 has a bunch of changes, so its not really beneficial to test A35.

--- Mystic BBS v1.12 A36 (Windows/32)
* Origin: Sector 7 [Mystic BBS WHQ] (21:1/108)

On 10/28/17, g00r00 pondered and said...

BINKP in A36 has a bunch of changes, so its not really beneficial to
test A35.

It's all A36 pre here now :) Will keep an eye out for anything and let you know.

--- Mystic BBS v1.12 A36 (Windows/32)
* Origin: Agency BBS | telnet://agency.bbs.geek.nz (21:1/101)

On 10/29/17, Avon said the following...

It's all A36 pre here now :) Will keep an eye out for anything and let
you know.

I've got it running here as well, on the Linux end of things. It's been
about a day now, and no issues detected. :)


---

Black Panther
aka Dan Richter
Sysop - Castle Rock BBS(RCS)
telnet://castlerockbbs.com
The sparrows are flying again...

--- Mystic BBS v1.12 A36 (Linux/64)
* Origin: Castle Rock BBS - castlerockbbs.com (21:1/186)

On 10/29/17, Black Panther pondered and said...

I've got it running here as well, on the Linux end of things. It's been about a day now, and no issues detected. :)

Good stuff :)

--- Mystic BBS v1.12 A36 (Windows/32)
* Origin: Agency BBS | telnet://agency.bbs.geek.nz (21:1/101)